Oxydizes, breaks down and cleans out fumes and volatile organic compounds (VOC), dioxins and other harmful substances using heat and catalysts.
Specifications
- Perfect for processing with a comparatively small air flow from several m3/minute to 200 m3/minute
- Cleaning accuracy of greater than 99%
- May be utilized in humidity up to 96%
- Far greater energy savings than offered by comparable fuel burning fume eliminators.（Cataley was developed as the result of a joint project with Cataley Industries.）
Uses heat to oxydize, break down and clean fumes and volatile organic compounds (VOC), dioxins and other harmful substances.
Specifications
- Perfect for processing with a comparatively small air flow from several m3/minute to 500 m3/minute
- Cleaning accuracy of greater than 99%
- May be utilized in humidity up to 96%（Thermal reactor produced as the result of a joint project with KEU of Germany）
Supplies a stable feed of paint to painting equipment. The use of precision gears allows absolute flow accuracy. The gear pump internalizes a cleaning mechanism, enabling speedy paint color changes.
Specifications
| Feed control | AC servo |
|---|---|
| Paint type | Solvent-based |
| Spray control range (for normal use) | 0-584cc/min |
| Dimensions (mm) | 400.8Lx200Wx170.6H |
| Weight (kgf) | about 10kgf |
The Monobell is an electrostatic coating machine that uses rotating atomization to produce a high quality paint finish. Small and light, it may be connected directly onto the arm of a painting robot, and can be used with metallic paints.
Specifications
| Bell rotation speed (rpm) | Maximum 40,000 rpm (while painting) |
|---|---|
| Voltage | DC-90kV 100μA |
| T/D valve | Internalized in bell |
| Dimensions (mm) | φ165(D)×425(L) |
| Weight (kgf) | 8.0 |
Used for painting the inside of automobile body panels and bumpers, the Multibell is an extremely safe electrostatic coating machine that uses rotating atomization to produce a high quality finish. Made entirely of resin, compact and light in weight, Multibell can be mounted to a robot, and is able to handle seven or more colors with an extremely small amount of paint loss during cleaning.
Specifications
| Bell rotation speed (rpm) | Maximum 50,000 rpm (while painting) |
|---|---|
| Voltage | DC-60kV 150μA |
| Multinozzles | Six single color nozzles and one combination nozzle, one cleaning nozzle on the bell cap for a total of eight |
| Dimensions (mm) | φ126(D)×289(L) |
| Weight (kgf) | 5.8 |
An electrostatic coating machine that uses rotating atomization to produce a high quality paint finish the Combination Bell can be mounted to a robot, and is able to handle six or more colors with an extremely small amount of paint loss during cleaning. It can also be used with metallic colors.
Specifications
| Bell rotation speed (rpm) | 4Maximum 50,000 rpm (while painting) |
|---|---|
| Voltage | DC-90kV 100μA |
| Multinozzles | Five single color nozzles and one combination nozzle, all internalized, and one cleaning nozzle on the bell cap for a total of seven |
| Dimensions (mm) | φ196(D)×420(L) |
| Weight (kgf) | 16.0 |
The Color Change Valve allows instantaneous switching of paint feed when painting with multiple types of paint (colors). Light and compact, the inside of the valve is easily cleaned, there is no contamination of paint when switching to a new color.
Specifications
| Dimensions(mm) | φ28(Dmax) φ26(D)×60.5(H) |
|---|---|
| Weight (g; without joint) | 95 |
| May be used with | Organic solvent paints, thinner, compressed air |
| Operating Pressure (MPa) | 0.4(4.0kgf/cm2) or greater |
| Warranty period | One year or one million operation cycles after delivery |
The Electrostatic Oiler is used to apply a uniform film of corrosion resistant oil to steel and aluminum sheet efficiently and without contacting the sheet. It is used extensively by major sheet metal processing plants both in Japan and overseas not only for corrosion prevention but to prevent damage to the material and improve stamping quality and efficiency. Trinity is the only domestic Japanese manufacturer of electrostatic oiling equipment, and it produces a larger number of models and types than any other manufacturer in the world.
Specifications
| ESO for extremely thin coating | 1-10mg/㎡ |
|---|---|
| Light oiler | 5-100mg/㎡ |
| Bell Oiler | 50-1,000mg/㎡ |
| Micron oiler | 50-3,000mg/㎡ |
| Slit atomizer | 300-5,000mg/㎡ |
